Product Name: Bi-Fuel Engine Fault Diagnosis Simulator

_Gasoline, LPG

Model Name: YESA-3450

Feature

■ LPG engine simulator that equipped with fuel, cooling, intake, exhaust panel 

so that allows theoretical training and experiments.

■ Easy to check and diagnose all faults that can happen in an actual vehicle system

so that it's able to do effective education concerning maintenance system.

■ It is the best model to see internal movement, operation, condition and component’s

location by cutaway structure.

■ Pressure gauge is attached on each range of hydraulic line on A/T for circuit training

of each shifting process.

■ Check terminal box is attached for the test of electronic circuits and sensors

with diagnose devise.

■ Exhaust muffler is specially designed with heat-resisting paint to be maintained 

at high temperatures up to 600ºC.

■ The entire process of ISO9001 and D.C.C.A.P.T of TQC method of YES01

are applied in manufacturing.







Specification

■ Composition

1) LPG engine assembly

2) Auto transmission assembly

3) All Startup-related electric devices

4) Fuel tank (LPG gas), DC 12V car battery and generator

5) Cooling System such as Radiator, Overflow Tank, Relay, Electric Fan

6) Exhaust System such as, Catalytic Converte,r Emission, Silencer

7) Start Switch (Key S/W) Anti-vibration dampers and a urethane wheels

8) Control box, fuel tank (removable), accelerator lever

9) Installment of safety guide of stainless molding type

10) Radiator-only stand and laser processed protection panel

11) Hydraulic gauge of each shift of auto transmission

*6 (1.5MPa *3, 2.5Mpa *4)

12) Vacuum and pressure gauge *1 (0.1Mpa)

13) Fuel pressure gauge *1 (1Mpa)

14) Battery voltage gauge *1 (30V)

15) Distribution by belt or chain and cam in head

16) Cylinder 2000cm ³ maximum

17)The engine is equipped with:

- A fuel supply system by electronic injection and an integrated

electronic ignition system to the injection device

- A shift switch in LPI mode as well as a witness LPI mode

- A system of gas injection to electronic management

- A diagnostic socket normalized

■ Size : Approx. 1,800 X 1,700 X 1,700 mm

■ Weight : Approx. 500 kg

Training Contents

■ Various practices by self-diagnosis.

■ Operation, measurement and inspection of auto transmission.

■ Measurement and inspection of oil pressure at eachA /T range.

■ Measurement of exhaust, Measurement and inspection of

compression pressure of cylinder.

■ Measurement of radiator cap pressure and inspection of the leakage

from the radiator.

■ Operation test of Fuel pump, Measurement and inspection of Oil pressure.

■ Measurement and adjustment of tensions of timing chain and fan belt.

■ Measurement and adjustment of voltage and current in such as a

charging circuits, start circuits.

■ Connector checking terminal for inspection of sensors and actuator.

■ Inspection of every part of intake and exhaust system.

■ Inspection of every part of each automotive electricity, fuel system,

ECU, sensors and actuator.

■ Inspection of belts in cooling system and pumps.

■ Inspection of the rest of parts.