Product Name: Electronic Component Training Kit

model Name: YECTK-100

Features

1) YECTK-100 helps users learn roles and characteristics of basic electronic components.  
2) Helps users learn how to apply components with practical trainings.
3) YECTK-100 provides 37 sample modules & 27 PCBs for manufacture practice.
4) YECTK-100 is composed of 3 parts, which are passive electronic components, active electronic components and sensors.
5) Passive electronic components part : resistor, capacitor, inductor, battery, connector, switch, relay, solar cell, motor, microphone, speaker, antenna, PCB, LED&7-segment.
6) Active electronic components part : diode, zener diode, transistor, crystal oscillator, microprocessor, rectifiers, SCR, operational amplifier, etc.
7) Sensor part : Temperature sensor, humidity sensor, gas sensor, pressure sensor, infrared sensor, human body sensor and tilt sensor.
8) There are TEST PINs in each module to measure characteristics of each component-applied circuit.
9) Text book carries 34-week course materials composed of theories, practices and reports.

Founctions

1) Understand types and characteristics of electronic components. 
2) Understand the trend of electronic component industry and technology.
3) Understand types and characteristics of passive electronic components and do practical trainings
4) Understand types and characteristics of active electronic components and do practical trainings
5) Understand types and characteristics of sensor components and do practical trainings.
6) Compose electric circuits with major electronic components.
7) Do measuring practices for electronic components with measuring devices.
8) Understand characteristics of basic electronic components for Robots, Embedded systems, and new Renewable energy generating systems.

Training Contents

Chapter 1 Introduction 
Chapter 2 Trend and and forecast of electronic component industry
Chapter 3 Basics of Resistor
Chapter 4 Capacity characteristics of resistor
Chapter 5 Applications of Resistor
Chapter 6 Basics of Capacitor
Chapter 7 Applications of Capacitor
Chapter 8 Basics of Inductor
Chapter 9 Applications of Inductor
Chapter 10 Battery
Chapter 11 Connector
Chapter 12 Switch
Chapter 13 Relay
Chapter 14 Solar cell
Chapter 15 Motor
Chapter 16 Mike
Chapter 17 Speaker
Chapter 18 Antenna
Chapter 19 PCB
Chapter 20 LED & 7segement
Chapter 21  Diode
Chapter 22  Zener Diode
Chapter 23  Basics of Transistor
Chapter 24  Applications of Transistor
Chapter 25  Oscillator
Chapter 26  Microprocessor
Chapter 27  Rectifier
Chapter 28  SCR
Chapter 29  Operational Rectifier
Chapter 30  Application of Operator Rectifier
Chapter 31  Temperature sensor and Humidity sensor
Chapter 32  Gas sensor and Pressure sensor
Chapter 33  Infrared sensor and Human Detection sensor
Chapter 34  Tilt sensor

Components

Specification

Product Name: Logic Circuit Trainer

model Name: YECTK-100

Features

• Basic gate combination and sequential logic circuit for digital logic circuits.
• Maximum 4 modules can concurrently be equipped for practice.
• Creative design practice by including basic gates.
• The LED indicates the state when you select items for practice after installation of the modules in the body.

Features

1. Basic gate modules: 11 types
   - [AND] [NOR] [OR] [NOT] [XOR] [XNOR] [NAND]
     [J-K Flip Flop] [D Flip Flop] [R-S Flip Flop] [T Flip Flop]
2. Combination and sequential modules : 16 types
   - [2bit sub] [10 base counter] [10 base ring counter] [add sub]
     [bcd 3-ex code conv] [bcd parrallel add sub] [binary to decade]
     [comp] [division] [encoder decoder] [half adder] [mux demux]
     [parallel adder] [shift register] [sync 3 bit updown counter]
     [sync 5 base ring counter]
3. LVCMOS 3.3V: 8EA
4. Clock source: 2EA
5. 7-segment: 2A
6. Light emitting diode (LED):  8EA LED for indicating state: 2EA
7. 9V Adapter 1EA
8. CLCD: 1EA, Control switch:  3EA

Training Contents

1. Boolean algebra (3wks)
   1.1 Boolean algebra & Logic gate (1wk)
   1.2 Theorem for Boolean algebra (1wk)
   1.3 Simplifying logical expression (1wk)
2. Combinational logic circuit (7wks)
   2.1 Adder & Subtractor (2wk)
   2.2 Encoder and decoder (2wks)
   2.3 Multiplexer and demultiplexer (2wks)
   2.4 Comparator (2wk)
3. Sequential logic circuit (8wks)
   3.1 Flip-Flop (2wk)
   3.2 Register (2wk)
   3.3 Asynchronous counter (2wks)
   3.4 Synchronous counter (2wk)
* The above contents are for 18 weeks.

Components

Specification

Product Name: Electric Basic Training Kit

model Name: YEBT-2000

Features

• Provides various types of electrical circuit training.
• Training circuit can be selected on the LCD panel.
• Signal generator included.
• Voltmeter and Current meter are included.
• Configuration of a training circuit is indicated with LEDs, facilitating connection of the circuit
• Enables training with customized circuits as well as the basic circuits.
• Provides a textbook and training process by PPT based on the training kit

Functions

• DC Volt, AC Volt measurement
• DC Current, AC Current measurement
• Signal generator(Sine, Square, Triangle) wave
• Understanding and practice of resistor characteristics
• Understanding and practice of capacitor characteristics
• Understanding and practice of inductor characteristics
• Understanding and practice of voltage and current circuits
• Understanding and practice of Ohm's law
• Understanding and practice of Kirchhoff's Law
• Understanding and practice of power and energy applications
• Basic theory and practice of AC circuit applications
• Understanding and practice of AC power applications
• Practice of measuring 3-phase AC and rectifying circuits

Training Contents

Chapter 1. How to use Equipment
Chapter 2. Resistor
Chapter 3. Capacitor
Chapter 4. Inductor
Chapter 5. Voltage and Current
Chapter 6. Ohm's Law
Chapter 7. Kirchhoff's Law
Chapter 8. Electric power and electric energy
Chapter 9. Basic alternating current circuit
Chapter 10. R, L, C characteristics in AC
Chapter 11. RLC series load characteristics in AC
Chapter 12. RLC paralled load characteristics in AC
Chapter 13. R, L, C power in AC
Chapter 14. RLC power in AC
Chapter 15. Three-phase alternating current
Chapter 16. Rectifier circuit

Components

Specification

Product Name: Basic electronic circuit Training kit

model Name: YBECK-1000

Features

1)provide 25 different modules
2) provide Power Supply Module
3) TEST Pin on each module boards.
4) Advantage using one connection cable between each modules and Power Supply Module.

Functions

1) Comprehensive training on basic electronic circuit modules
2) Measuring practice using Electronic Circuits and Power Supply Module.
3) Suitable for prerequisite course who major electronic engineering.
4) Improve the student techniques in handling the electronic circuits.
5) Application practice by each of other module connection

Training Contents

1) Diode Characteristics
2) Voltage rectifier
3) BJT Bias
4) BJT Amplifier
5) FET Bias
6) FET Amplification
7) Differentiator
8) Integrator
9) Adder
10) RC Oscillator
11) LC Oscillator
12) Square wave oscillator & Triangle-wave oscillator
13) Passive elements filter
14) Butterworth band-pass filter
15) Active element filter
16) Power control circuit by SCR
17) Mixer
18) Power amplifier

Components

Specification

Product Name: Test Bed

model Name: YTB-2000

Oscilloscope (8˚±Color LCD Type)

Digital multimeter (D.M.M)

•22000-Counter DMM
•DCV, DCI, ACV, ACI, Resistance, Capacitance Measurement
•AC Bandwidth 45~10k Hz
•True RMS Measurement
•Auto/Manual Ranging
•RS-232 Communication Port & PC Software Supported
•Peak, Relative Measurement
•46-Segment Analog Bar Graph Display
•Data Hold

User guide manual book contents

(1) TB-2000 system configuration
(2) Power
   2-1. AC Power
   2-2. DC Power
   2-3. Signal Generator
   2-4. Explanation of terminals
(3) Bread Board
(4) Experiment on Modules
(5) Oscilloscope
(6) Digital multimeter
(7) Cable storage box

Specification

Product Name: Test Bed

model Name: YTB-1000

Oscilloscope

Digital multimeter (D.M.M)

• 3 1/2 DIGIT HAND-HELD DIGITAL MULTIMETER
• 2000 Counts, Maximum Display 1999
• DCV, ACV, DCI, Resistance Measurement
• Celsius Temperature Measurement
• Manual Ranging
• Data Hold

Specification

Product Name: Digital Communication Training Kit

model Name: YDCTK-1000

Features

1. Easy waveform observation by synchronization between informational signal and carrier required for communication experiments.
2. Easy to understand the mechanism of communication through step by step signal measurement.
3. Minimized wiring facilitates the signal measurement.
4. Modulation and demodulation is configured in a single module, facilitating understanding of the whole system.
5. Provide practice of interface between modules. 6. Useful for the training of various measuring instruments as well as understanding digital communication.

Founctions

1. Provide training for various signal generators.
2. Provide training for digital coding algorithms - NRZ, RZ (unique, bipolar), Bipolar (AMI), Manchestor code.
3. Provide training for pulse analog and digital modulation and demodulation communication - PAM, PTM, PCM, DM, ADM
4. Provide training for digital modulation and demodulation - ASK, FSK, PSK, QPSK, QAM.
5. Provide basic and advanced training for basics of phase locked loop.

Training Contents

Chapter 1, Signal Generator  : Sign wave, Triangle wave, Square wave, PN code , Gold code
Chapter 2, Line Code Encoder / Decoder  : NRZ, RZ, Manchester, AMI code
Chapter 3, PAM modulation and demodulation
Chapter 4, PTM(PPM,PWM) modulation and demodulation
Chapter 5, PCM modulation and demodulation : Sampling, quantization, encoding, decoding, detection
Chapter 6, DM modulation and demodulation
Chapter 7, ADM modulation and demodulation
Chapter 8, ASK modulation and demodulation
Chapter 9, FSK modulation and demodulation
Chapter 10, PSK modulation and demodulation
Chapter 11, QPSK modulation and demodulation
Chapter 12, QAM modulation and demodulation
Chapter 13, PLL

Components

Specification

Product Name: Analog Communication Training Kit

model Name: YACTK-1000

Features

1) Easy to understand the mechanism of communication through step by step signal measurement.
2) Minimized wiring facilitates the signal measurement.
3) Modulation and demodulation is configured in a single module, facilitating understanding of the whole system.
4) Useful for the training of various measuring instruments as well as understanding analog communication.
5) If the option module is added, the DC power supply and the signal generator is not necessary, and all of the experiments can be implemented using ACTK-1000 Modules  and Oscilloscope.

Founctions

Training Contents

Components

Specification