Refrigerations & Airconditioning

Refrigerations & Airconditioning
Refrigeration & Freezing Trainer Equipment
Eco_friendly Refrigeration Trainner Equipment
Renewable Energy Trainer Equipment
Welding Equipment
Refrigeration and Air Conditioning workshops equipment
Simulation Software
Refrigerations & Airconditioning > Renewable Energy Trainer Equipment

Wind Energy Trainer with Wind Turbine Generator

YESRE-1002

Inquiry

PDF Download

확대 이미지

    Product Name: Wind Energy Trainer with Wind Turbine Generator
    Model Name: YESRE-1002
    Features
    ·Power supply: 230
    ·Frequency: 60 Hz
    ·Include an indoor wind-generator operating system, a benchtop control panel, a horizontal-axis wind turbine generator, an aluminum generator housing, a brushless permanent-magnet alternator, a microprocessor-based regulator, and a benchtop control panel
    ·Rated power: 100 VA
    ·Supply type: single-phase
    Operating Modes and Additional Requirements
    ·With no wind, all energy consumed by the user load shall be drawn from the battery
    ·With wind and no load, all generated energy shall charge the battery
    ·With wind and load, generated energy shall partly charge the battery and partly supply the load
    ·When load demand exceeds the wind-generated energy, supplemental energy shall be drawn from the battery
    ·For outdoor use, the wind turbine shall track wind direction and rotate freely on its vertical support
    ·Include a battery control panel and a wind speed and direction sensor
    ·Provide a benchtop control panel comprising a sine-wave inverter, electrical loads, and electrical instrumentation to measure energy flows in the circuit branches; a data-acquisition board with a USB interface for a PC (module only); and a buffer battery
    ·Include a wind speed and direction sensor
    ·Provide three composite blades and a rotor diameter of 1.17 m
    ·Energy output: 30 kWh/month at a wind speed of 5.8 m/s (13 mph)
    ·Cut-in wind speed: 3.6 m/s (8 mph)
    ·Maximum wind speed: 49.2 m/s (110 mph)
    ·Provide a microprocessor-based regulator with 12 VDC output, high-wind protection, and electronic torque control
    ·Provide a stainless-steel support mast, 1.5 m long and 48.1 mm outside diameter, including a mounting kit
    ·Provide a steel structure with a full-color synoptic diagram on the front and a rear AC load bank comprising five individually switchable 30 W lamps
    ·Inverter: 600 W continuous output; 1,200 W peak output; 12 VDC input; 230 VAC, 50 Hz output; modified-sine-wave output; low-battery shutdown; and overload, short-circuit, and overtemperature protection