Product name: Wireless LAN Training System

Model: YWLAN-TS-1000

 Features

■ Wi-Fi practice board

  ● Wireless standards : IEEE802.11b/g/n

  ● Frequency range : 2.421~2.485GHz

  ● Data transmitting speed : 54Mbps ~ 1Mbps

  ● Serial cable connection to Wi-Fi Server

  ● Target Socket connection : Max 5 sec

  ● Best security via 64/128bit WEP, WPA, WPA2 Simple AT command practice

■ Wireless LAN Protocol Analyzer

  ● The ability to capture : Protocol capture to 802.11 and higher - layer

  ● Frequency band : b/g/n

  ● Number of Protocol analyzer : Max 256

  ● Operating system : Windows XP

  ● Others : Channel switching function

Training Contents

PART 1. Introduction to Wireless LAN technology

  Chap 1. Introduction to Wireless LAN

  Chap 2. Wireless LAN Fundamentals

  Chap 3. Wireless LAN Technology(IEEE802.11 b/g/n)

PART 2. System Experimental Environment

  Chap 4. System configuration and setting

PART 3. WLAN packet structure and protocol analysis

  Chap 6. WLAN packet analysis

  Chap 7. WLAN search protocol analysis

  Chap 8. WLAN certification protocol analysis

  Chap 9. WLAN conjunction protocol analysis

  Chap 10. WLAN internet protocol analysis

Product name: Embedded Router Trainer

Model: YERT-5000

 Features

■ This is an educational equipment which enables user to have training over Network Configuration and Embedded Programming Practice on Internet Environment.

  1) Embedded programming practice of TCP / IP protocol suite

  2) Network configuration practice based on Router

  3) TCP / IP protocol analysis

  4) Embedded program porting practice

Specification

CPU: Intel PXA255 400MHz (ARM RISC Chip)

RAM: SDRAM - 64 Mbytes

ROM: Nor Flash - 4 Mbytes

Nand: Flash 64 Mbyte

Ethernet: CS8900 10 Mbytes 5 port

Serial port: Full UART 1 Port

AC Power: 100 / 220V 1.5A

USB Interface: Ver 2.0

Training Contents

Vol.Ⅰ Embedded Network Programming Experiments (for ERT-5000N)

 Part I Embedded Network and Environment

   Chapter 01 Introduction to Routing Network System

   Chapter 02 Network Configuration Method

   Chapter 03 Introduction to ERT-5000 and Hardware

 Part II Software Practice Environment of Embedded Network Board

   Chapter 04 System Installation

   Chapter 05 Loading and Debugging Environment

 Part III Basic Practice for Embedded Programming

   Chapter 06 Practice for Demo Programming

   Chapter 07 Practice for Packet Transmission Programming

   Chapter 08 Practice for Packet Transmission and Receive Programming 

 Part IV Practice for Embedded Programming Application

   Chapter 09 Practice for Hyper-terminal Command Programming

   Chapter 10 Practice for Ethernet Interface Setting Programming

   Chapter 11 Practice for Ethernet Protocol Programming

   Chapter 12 Practice for ARP Programming

   Chapter 13 Practice for IP Programming

   Chapter 14 Practice for Ping Programming

Vol.Ⅱ Embedded Router Experiments (for ERT-5000R) 

 Part I Embedded Router and It’s Environment

   Chapter 1 Introduction to Routing System

   Chapter 2 Network Building Technique 

 Part II Practice of Static Routing

   Chapter 3 What are Default Route and Static Route

   Chapter 4 Practice of Default Route and Static Route Operation

   Chapter 5 Practice of Default Route and Static Route Programming

 Part III Practice of Firesall

   Chapter 6 What’s fire wall

   Chapter 7 Practice of fire wall Operation

   Chapter 8 Practice of fire wall Programming

 Part IV Practice of RIP Routing Chapter 9 What is RIP Routing Lab

   Chapter 10 Practice of RIP Routing Operation

   Chapter 11 Practice of RIP Routing Programming

 Part V OSPF Routing Test

   Chapter 12 VLSM and Aggregation

   Chapter 13 What‘ s OSPF routing

   Chapter 14 Practice of OSPF routing Operation

   Chapter 15 Practice of OSPF routing Programming