Product Name: Mechanical Control Training System

_Advanced Type

Model Name: YESA-2850

Feature

■ Understand the structure and principle of motor shaft, coupling, belt,

chain, inspection method and maintenance method, actua lmotor and

driving device operate, and practice is possible.

■ It is possible to check the operation and operation status 

of the V-belt, chain, timing belt, etc. by using the drive motor.

■ Operational driving elements are configured for training effectively.

■ The entire process of ISO9001 and D.C.C.A.P.T of TQC method of

YES01 are applied in manufacturing.




Specification

■ 1. Machine-driven simulator : 1 SET

 1) Driving part

- When the drive motor is driven, the V-belt, chain, vibration

measurement, timing belt, and bevel gear are designed

to operate in sequence.

(1) AC motor

- Pole : 3 phase, 0.4KW, Voltage: 220V / 380V, Speed: 1800

RPM

(2) Worm reducer

- input rpm : 1800, input HP: 0.15, output HP: 0.08

(3) V-belt portion

- The V-belt pulley is attached to the front part of the drive

motor and the worm reducer and connected by V-belt.

(4) Chain part

- Worm reducer and chain sprocket are connected by chain.

- Use the chain tension roller to prevent the chain from

sagging.

(5) Timing belt

- Timing gears and timing belts are connected to make

operation possible.

- Timing Belt Use the tension roller to prevent

the timing belt from sagging.

(6) Bevel gear part

- Two drive shafts can be controlled using bevel gears.

2) Control portion

(1) Inverter

- Input voltage : 1 phase 220V

- Output voltage : 3 phase 220V

- Motor capacity : 0.75kW

(2) RPM meter

- Maximum display : 19999 (M5W)

- Auto Zero function and Hold function (except M5W)

(3) Control device

- It is attached to the front and performs OPERATING.

- Operation switch (start, stop)

- PUSH BUTTON SWITCH : 2ea

(4) Driving device training stand

- Size : 1300 (W) X 700 (D) X 1700 (H) inside and outside

- table type that can mount the driving device







 

                                                                                                                                                               

Product Name: Mechanical Elements Training Equipment

_Type Three

Model Name: YESA-2851

Feature

■ It is easy to systematically educate the functions of components such as

bolts, nuts, keys, pins, brakes, bearings, oil rings, springs, pipes, valves

and gaskets.

■ Components include bolt : 30, nut: 10, washers: 5, pin: 5, key :10, 

spring: 6, bearing : 10, shovel: 1, Valve : 6 types, piping pipes: 4 types,

connecting pipes : 4 types, brake: 2 types, gaskets : 5 types.

■ 6 kinds of valves are precise cutting operation type and their working

principle and function explanation are effective.

■ The panel is color-printed and the Function description, exhibtiion and

education are efficient.

■ Painting and coating were done using automotive paint.

■ The entire process of ISO9001 and D.C.C.A.P.T of TQC method of

YES01 are applied in manufacturing.




Specification

1) Fastening machine elements

- More than 5 types for each

standard, Stud bolt, Anchor

Bolt, stay bolt, Eye Bolt, T-Bolt,

Computational bolts, Allen

wrench bolts, U-bolts, Hexagon

nut with groove, Cap nut, Flat

washer, This washer, spring

washer, Lock nut, Lock washers,

Hook spanner, Nylon nut, Double

nut, Embedded key, tangent

key, Trapezoidal thread, round

screw, Square screw, Harry Coi,

Reamer Bolt

2) Coupling

- Grid coupling, Chain coupling,

Gear Coupling, Jaw coupling,

Flange coupling, Cylindrical split

coupling

■W3) Bearing

- UCP bearing, UCF bearings,

U CT bearings, Journal Bearing,

thrust bearings

4) Tables and panels

(1) table

- Body : 1.6t iron plate

- Frame : Square iron pipe

- Load capacity : 600kg or more

-Casters: 4 "Urethane, 4 revolutions

(Wheel On / Off type)

- Size : 1,500 X 700 X 1,800 mm

inside and outside

5) Panel

- Attach each drive simulator

nameplate.